From
30,80 €
Hyper-Lubricant – Special Drain – For all engines running on bioethanol
Dosage: 2% to 3% of the quantity of oil, i.e. 1 bottle of 100 ml for 4 to 5 liters of oil.
MECACYL CRBioEthan is the adaptation of MECACYL CR for engines running on ethanol. Its innovation and success make the "CR" range the essential lubrication choice on the market.
As early as 2009, the ENSAM SERAM (National School of Arts and Crafts Engineers) laboratories demonstrated the results of MECACYL CR (and CRBioEthan) hyper-lubrication.
The use of MECACYL CRBio Ethan hyper-lubricant has the following effects:
– Reduced fuel consumption
– Reduced friction
– Reduced engine wear
– Decrease in temperatures and endothermic reactions
– Reduced energy consumption
| Weight | 0,21 kg |
|---|---|
| Size | 6,9 × 17,8 cm |
| Brand | |
| Product Name | |
| Product Type | |
| Product color | |
| Contributions | Provides better mechanical protection , facilitates cold starts , maximum results are obtained from the second use of MECACYL CRBioEthan , limits the effects of ethanol alcohol dilution in the oil , optimizes engine performance: more torque, more power and better acceleration , reduces fuel consumption by 8 to 15% |
| Types of uses | |
| Engine | |
| uses | |
| Frequency of use | |
| How to use | |
| Contraindication | Silicone, paraffin and graphite oils , engine in the process of breaking down (oil leaks, compression failure, etc.) |
| Guarantee | All MECACYL hyper-lubricants are insured by AXA ; the manufacturer's warranty is preserved. |
| Certifications | |
| Earnings generated | Protecting the engine and oil , engine power and performance , reducing fuel consumption and pollution |
| Reference | |
| Safety | |
| Precautions for use | |
| Capacity |
Prerequisites:
Mécacyl CRBioEthan is the adaptation of Mécacyl CR for engines running on ethanol. If your vehicle is in perfect condition, has always been regularly maintained, has no abnormal oil consumption or leaks, and if you rarely or never use the additive, you can absolutely use Mécacyl CRBioEthan with excellent results.
Use :
Le Mécacyl CRBioEthan Use with clean oil after an oil change. If you were unable to put it in after the oil change, you can add it a maximum of 3 km after an oil change.
Dosage: 2% to 3% of the quantity of oil, i.e. 1 bottle of 100 ml for 4 to 5 liters of oil.
Depending on the number of kilometers or the level of wear of the vehicle, 1 to 2 frequent oil changes may be recommended (see Frequency of use).
To note :
– If your vehicle is equipped with a Mecacyl unit, during a first Mecacyl oil change, it may be necessary to reset your unit after 1,000 km, as Mecacyl allows you to modify engine performance and therefore generate greater fuel economy.
– White smoke will be emitted from the exhaust during the first 10 to 15 km after adding Mécacyl CRBioEthan . This is perfectly normal: Mécacyl CRBioEthan eliminates water and oxides; a long-lasting engine is, among other things, an anhydrous engine.
Frequency of use :
Follow the manufacturers' recommendations.
Maximum 15 km to maintain optimum results.
Possibility if manufacturer oil change 20 km to add Mécacyl CRBioEthan.
On new vehicles:
– Add 2% without draining at 5 km according to the procedure defined above.
– Put back 2% to 3% of Mécacyl CRBioEthan at the warranty drain around 10/12 kms.
– Remit 2% to 3% of Mécacyl CRBioEthan at each oil change.
On used vehicles:
– Vehicle with 50 to 000 kms: Change the oil after introducing the Mécacyl CRBioEthan at 5 kms then resume oil changes at the classic pace with Mécacyl CRBioEthan Everytime
– Vehicle with 100,000 to 150,000 km: Change the oil at 3,000 km, change the oil at 5,000 km, then change the oil at the classic interval with Mécacyl CRBioEthan each time.
– Vehicle with 150,000 to 180,000 km: Change the oil at 3,000 km, change the oil at 5,000 km and if necessary change the oil at 8000 km then change the oil at the classic interval with Mecacyl CRBioEthan each time.
– Vehicle beyond 180 kms: Contact us.
Oil type:
In order to have faster installation, 10W40 or 15W40 type oils are suitable in 90% of applications.
Generally speaking, all oils based on petroleum polymers are compatible with MECACYL whether they are multigrade, semi-synthetic or synthetic (5W40, 5w30, etc.).
For frequent oil changes, 15W-40 (for vehicles manufactured before 2000) or 10W-40 (for vehicles manufactured after 2000) oils are perfectly suitable. Afterwards, resume regular oil changes using Mécacyl CRBioEthan and the oil of your choice.
Benefits :
– Fuel savings (8 to 15%).
– Facilitates cold starts.
– Engine protection (Ethanol alcohols).
– Reduction of pollution.
– Silence and flexibility.
